Epson 2000 - Manual (Page 159)

Maintenance 11-13
R4C428_V2
long.bk
Rev_C
A5 size MAINT.FM
1/14/00 Pass 2
R Proof Sign-off:
tantoname
_______
leadername _______
editorname _______
For Macintosh Users
1. Click the EPSON Screen Calibration icon in the EPSON
Scanner folder. The following dialog box appears.
2. Adjust the slider until the shades of the gray horizontal stripes
match.
3. Click OK to finish calibrating your scanner and monitor.
The gray stripes will not blend perfectly; however, try to make
the different tones match as closely as possible.
The screen profile contains calibration information for the
previewed image as well as the scanned image.
Cleaning the EPSON Stylus Scan
To keep your Stylus Scan operating at its best, clean it thoroughly
several times a year as follows.
1. Make sure the Stylus Scan is turned off and all of its lights are
off. Then unplug the power cord.
2. Remove any paper from the paper feeder.
3. Use a soft brush to carefully clean away all dust and dirt from
the paper feeder and document feeder.