Epson 2000 - Manual (Page 103)

Checking Printer Status and Managing the Print Jobs for Macintosh 7-5
R4C428_V2
long.bk
Rev_C
A5 size STATM.FM
1/14/00 Pass 2
R Proof Sign-off:
tantoname
_______
leadername _______
editorname _______
Using EPSON Monitor3
After you send a print job to the EPSON Stylus Scan, you can use
the EPSON Monitor3 utility to check, cancel, or change the
priority of the print jobs that are queued for printing. This utility
also shows the status of the job currently being printed.
Note:
The installation of a new application may prevent you from using
Background Printing, which must be turned on to use EPSON
Monitor3. This is because some of the Extension files used by
Background Printing have been overwritten by the application’s
installer. Re-install the Stylus Scan driver to correct this problem.
Accessing EPSON Monitor3
To use EPSON Monitor3, follow these steps.
1. First, turn on Background Printing in the Chooser or in the
Background Printing dialog box.
2. Send a print job to the Stylus Scan.
3. Select EPSON Monitor3 from the Application menu at the
right end of the menu bar. This opens a dialog box similar to
the one below.