HEIDENHAIN PT 880 - Manual (Page 134)

134 II Technical Information
II – 4 D
a
ta Int
e
rf
ace
Parallel port
The parallel port is located on the rear panel (see Fig. II.27 & Fig. II.28).
The following devices can be connected to this port:
„ Printer with “Centronics” parallel data interface.
„ Printer that can communicate in “Compatability Mode” (also
commonly called Centronics Mode), e.g. Okidata 182 Dot Matrix,
HP Laser Jet II.
For operations that support data transfer, import and export soft keys
will be available. Refer to the operation section of the manual for more
information.
To export data to a parallel port printer, press the EXPORT soft key. The
data is exported in an ASCII text format which can be printed directly.
T0140 Key ‘I’ (incremental)
A0000 Send device identification
A0200 Send actual position
S0000 Reset device
S0001 Lock keyboard
S0002 Release keyboard
Sequence of commands Function
Fig. II.27 Pin connection for parallel port
Fig. II.28 25 Pin receptacle X32