Polaris Series 10 Ranger 425 2x4 - Manual (Page 76)

74
MAINTENANCE AND LUBRICATION
Engine Oil
Check the Oil
The oil tank is located
under the seat. To check
the oil:
1. Set machine on a level
surface.
2. Start the engine and let
it idle for 20-30
seconds.
3. Stop the engine, and
remove the seat as
described on page 50 to
access the dipstick (1).
4. Remove dipstick and
wipe dry with a clean
cloth.
5. Screw in the dipstick completely, remove it and read the oil level.
NOTE: The dipstick must be screwed in to keep the angle and
depth of stick consistent.
6. Remove dipstick and check to see that the oil level is between the
full and add marks. Add oil as indicated by the level on the
dipstick. Do not overfill.
ADD 8 OZ. NORMAL FULL
Maintain Oil Level In Normal Range
1
CAUTION
Use only Polaris Premium 4 All Season synthetic oil, or API
certified “SH” oil. Never substitute or mix oil brands. Serious
engine damage and voiding of warranty can result.
Vehicle operation with insufficient, deteriorated, or
contaminated engine oil will cause accelerated wear
and may result in engine seizure, accident, and injury.
WARNING