Polaris Series 10 Ranger 425 2x4 - Manual (Page 69)

67
MAINTENANCE AND LUBRICATION
Periodic Maintenance Schedule
Careful periodic maintenance will help keep your vehicle in the safest,
most reliable condition. Inspection, adjustment and lubrication
intervals of important components are explained in the following chart:
Maintenance intervals are based upon average operating conditions.
Vehicles subjected to severe use, such as operation in wet or dusty
areas, should be inspected and serviced more frequently. If you are not
familiar with safe service and adjustment procedures, have a qualified
dealer perform these operations.
Inspect, clean, lubricate, adjust or replace parts as necessary.
"
More often under severe use, such as dirty or wet conditions
L
Emission Control System Service (California)
NOTE: Inspection may reveal the need for replacement parts. Always
use genuine Polaris parts available from your Polaris dealer.
Item Hours Remarks
Brake System Pre-op-
eration
Pre-operation inspection item
Tires Pre-op-
eration
Inspect daily, pre-operation inspection
item
Wheels Pre-op-
eration
Pre-operation inspection item
Frame nuts, bolts,
fasteners
Pre-op-
eration
Pre-operation inspection item
Parking Brake Pre-op-
eration
Check lever adjustment daily; adjust
Coolant/Level In-
spection
Daily Replace engine coolant every two
years
Headlamp Inspection Daily Check operation daily; apply Polaris
dielectric grease to connector when
replaced
CAUTION
Due to the nature of adjustments indicated by a
J
, it is
recommended that service be performed by an authorized
Polaris dealer. Do not attempt to perform this work unless you
are familiar with mechanical repair.