Polaris Series 10 Ranger 425 2x4 - Manual (Page 63)

61
OPERATION
Starting the Engine
Starting a Warm Engine
Warm engines do not normally require the use of the choke. Overuse of
the choke can cause the spark plug to become wet fouled.
1. Place the transmission in neutral and move the vehicle to a level
surface.
2. Lock the parking brake
3. Sit in the vehicle in the driver’s seat with the seatbelt fastened.
4. Turn the ignition key to START.
5. If the engine has cooled to a point where it does not readily start,
intermittent use of the choke knob pulled half way out is permitted.
6. If the engine is over-choked by mistake when warm, depress the
throttle lever fully while cranking to aid in starting.
7. Release the throttle lever immediately after the engine starts. If the
engine does not start and all conditions are favorable, change the
spark plug.