Polaris Series 10 Ranger 425 2x4 - Manual (Page 54)

52
FEATURES AND CONTROLS
Controls
Transmission Gear Selector Operation
The transmission gear selector
(1) is located on the console to
the right of the steering wheel
and has four positions (2): high,
low, neutral and reverse
NOTE: Low is the primary
driving range for this vehicle.
High is intended for use on hard
packed surfaces with light loads.
To change gears, stop the
vehicle and with the engine
idling, move the lever to the
desired gear. Do not attempt to
shift gears with engine speed above idle or while the vehicle is moving.
Always place the transmission in gear with the parking brake locked
whenever the vehicle is left unattended.
Maintaining shift linkage adjustment is important to assure proper
transmission function. Should you experience any shifting problem
see your dealer.
Do not attempt to shift the transmission while the vehicle is
moving or damage to the transmission could result.
Always place the transmission in gear with the parking brake
applied and turn the vehicle off whenever the vehicle is left
unattended.
CAUTION
H
L
N
R
1
2