Polaris Series 10 Ranger 425 2x4 - Manual (Page 70)

68
MAINTENANCE AND LUBRICATION
Periodic Maintenance Schedule
Item Hours Remarks
Tail lamp inspection Daily Check operation daily; apply Polaris
dielectric grease to socket when re-
placed
"
L
Air Filter - Main Ele-
ment
Weekly Inspect-Replace if necessary
"
Transmission Oil
Level
25 hrs Check level; change annually
Battery 25 hrs Check Terminals/clean/check fluid
level
J
Brake pad wear 25 hrs Inspect periodically
"
L
Engine breather filter 25 hrs Inspect--replace annually and as
needed
"
General Lubrication 25 hrs Lubricate all fittings, pivots, cables,
etc.
Engine Cylinder
Head and
Cylinder Base Fas-
teners
25 hrs Re-torque required at first service
only
"
L
Engine Oil - Level/
Change (4-Cycle)
100 hrs Check Level Daily; Break in Service
at 25 hours. Change oil more often in
cold weather use.
"
L
Oil Filter 100 hrs Replace with oil change
L
Engine breather
hose
100 hrs Inspect
J
Carburetor Float
Bowl
50 hrs Drain bowl periodically and prior to
storage
J
Throttle Cable 50 hrs Inspect--adjust, lubricate, replace if
necessary; pre-operation inspection
item
L
Choke (Enricher)
Cable
50 hrs Inspect--adjust, lubricate, replace if
necessary
Shift linkage 50 hrs Inspect, adjust
J
Drive belt 50 hrs Inspect--adjust, replace if necessary
J
Steering 50 hrs Inspect daily, lubricate