Maintenance and lubrication, Storage – Polaris Series 10 Ranger 425 2x4 User Manual
Page 108

106
MAINTENANCE AND LUBRICATION
Storage
If your vehicle is to be placed in
extended or off season storage, the
following steps should be taken to
preserve its condition.
1. Perform all necessary repairs
and thoroughly clean the
vehicle.
2. Remove the spark plug and
pour approximately one ounce
of Premium 4 oil into the
cylinder. Operate the starter
for a few seconds and reinstall
the spark plug.
3. Remove the battery. Store it in a cool, dry place out of the sun.
4. Lubricate suspension pivot points, lower steering post and rear axle
fittings.
5. Drain the engine side cover.
6. Block the vehicle so all tires are suspended off the ground.
7. Spray oil on all unpainted metal surfaces to prevent rusting. Avoid
getting oil on rubber parts or in the brakes.
8. Lubricate all cables.
9. Tie a plastic bag over the exhaust pipe and air cleaner inlet to
prevent moisture or small animals from entering.
10. Cover the vehicle with a canvas cover. Do not use plastic or coated
materials since they do not allow ventilation of the vehicle.
Drain tube
attached
here
Drain Screw