Polaris Series 10 Ranger 425 2x4 - Manual (Page 74)

72
MAINTENANCE AND LUBRICATION
Lubrication Recommendations
9. Swing Arm
Bushings
Grease** Locate fittings on swing arm and
grease with grease gun.
25 hours
10.Rear angle
drives
GL5
80-90
weight
gear lube
Fill to bottom thread of filler hole.
Make certain machine is on a
level surface.
50 hours
11. Front A Arm
Pivot Shaft
Grease**∆ Locate fitting on pivot shaft and
grease with grease gun.
50 hours
* More often under severe use, such as wet or dusty conditions.
**Polaris Premium all Season Grease or grease conforming to NLGI No. 2, such as
Conoco Superlube M or Mobilegrease Special.
+ Grease every 50 hours, or after submerging in water or before long periods of storage or
after pressure washing. Always use Polaris Premium U-Joint Lube for maximum service of
these driveline components (PN 2871515 3 oz.)(PN 2871551 14 oz.).
∆ When suspension action becomes stiff or after washing.
NOTE: Hours are based on 10 mph average.