Polaris Series 10 Ranger 425 2x4 - Manual (Page 106)

104
MAINTENANCE AND LUBRICATION
Lights
Indicator Lamp Replacement
1. Lift the hood.
2. Reach in behind the dash panel
and lift the release (1) to
unplug the light from the
harness.
3. Using a flat head screwdriver,
press on the tab (2) on the top
of the light to remove the
indicator light assembly from
the dash panel.
4. Using a screwdriver, turn the
light that needs to be replaced
1/4 turn counter clockwise.
5. Grip the light with a needle nose plier and remove the light from
the assembly.
6. Install the new light and use a small flat head screwdriver to seat it
into place, 1/4 turn clockwise.
7. Snap the assembly back into the dash panel and reconnect the
harness.
8. Close the hood
Tool Kit
To help you perform routine maintenance, a tool kit is provided. Items
included in the kit are:
S
screwdriver
S
open end wrench (8-10 mm)
S
open end wrench (12-14 mm)
S
tire pressure gauge
S
spark plug wrench and handle
NOTE: Other tools are also necessary to perform maintenance work.
They are called out later in this manual.
1
2