Polaris Series 10 Ranger 425 2x4 - Manual (Page 72)

70
MAINTENANCE AND LUBRICATION
Lubrication Recommendations
Item Lube Rec. Method Frequency*
1. Engine Oil Polaris Premium
4 Synthetic
0W40
Add to proper level
on dipstick. See
page 77.
Check level
daily.
2. Brake Fluid DOT 3 Only Maintain level be-
tween fill lines. See
page 95.
As required;
change every
200 hours
3. Transmission Oil Polaris Premium
Synthetic chain
case lube
Maintain level at
the bottom of the fill
plug threads. See
page 78.
Change at 100
hours
4. Gearcase Oil,
Front
Gearcase Oil,
Middle
Premium Hub
Lube
GL5 80-90
weight general
lube
Fill to bottom thread
of filler hole. Make
sure machine is on
level surface.
Change
annually
5. Prop Shaft
U-joints
Grease+ Locate Fittings and
grease
50 hours
6. Front Propshaft
Yoke
Grease+ Locate fittings and
grease -- 3 pumps
maximum
50 hours
7. Front Drive Axle
(U Joint)
Grease+ Locate grease fit-
ting and grease
with grease gun.
50 hours
8. Ball Joint Grease** Locate fitting on
back side of struts
and grease with
grease gun.
50 hours