Polaris Series 10 Ranger 425 2x4 - Manual (Page 56)

54
FEATURES AND CONTROLS
Controls
Ignition Switch
This is a three-position, key-operated switch. The key can be removed
from the switch when it is in the OFF position.
Light Switch Lever
Turn on headlights and taillights by flipping the light switch lever up,
with the ignition switch key in the ON position.The lights go off when
the lever is pushed down.
AWD Rocker Switch
Vehicles equipped with AWD can be operated in either 2WD or AWD.
The AWD is operated by a rocker switch located on the console. Flip-
ping the lever up will engage the AWD.
OFF
ON
START
Engine off. All electrical circuits off except Acc. 12V.
All electrical equipment can be used.
Electric starter is engaged by holding ignition switch
key in this position. Upon release, the key will return
to the ON position.
CAUTION
Do not operate the starter continuously for more than 5 seconds,
or the starter will overheat and the battery power will drop
temporarily. Wait at least 5 seconds between each operation of
the starter to let it cool and the batter power recover.
Do not turn the ignition switch key to the START position with
the engine running, or damage to the starter can result.