Grass Valley SSP-3801 User Guide v.1.3 - Manual (Page 8)

4
Overview of the SSP-3801
Opening the web interface
To login to the SSP-3801 card:
1 In a web browser, enter the IP address for the card and press Enter.
For more information on how to assign an IP address for the SSP-3801 card on your
network, see the Installation and Configuration Guide. The SSP-3801 Login page opens.
Fig. 1-3: SSP-3801 login page
2 Enter your username and password in their respective fields and click OK.
If this is the first time you are logging into the SSP-3801, you should log in as follows:
• Username: admin
• Password: P1ayout (the second character is the number 1)
If you do not know what your username and password are, contact your System
Administrator.
The System Status information for the SSP-3801 card is displayed in the Status header of
the web interface. It displays the information about the service such as the system time, the
name and status of GV STRATUS Playout, the HCO status (if enabled), and the username of
the person who is currently logged in.
Fig. 1-4: Login name displayed in the header
IMPORTANT
If you are configuring the SSP-3801 card for the first time, we recommend
that you change password for the “admin” account.
For more information, see the Installation and Configuration Guide.
Login
name