Grass Valley SSP-3801 User Guide v.1.3 - Manual (Page 11)

7
SSP-3801
User Guide
Fig. 2-1: Sample of an off-air slide
To configure what action to take when playout is off-air:
1 Select Channel Configuration > Off Air Behavior. The Off Air Behavior page opens.
Fig. 2-2: Off Air Behavior page
2 From the Off Air Action list, select one of the following actions to occur after the initial
three seconds has expired and the off-air situation is not resolved:
• Show Black: displays a black screen with no graphics.
• Show Off Air Slide: displays the full-screen graphic specified in the Off Air Slide
field.
• Show Live: displays the live feed from the source selected in the Live SDI Source
list.
3 In the Live SDI Source list, select the source for the live feed to be broadcast if an off-air
situation occurs and the Show Live option is selected.
4 In the Off Air Slide field, type the URI location for the screen graphic to be broadcast if
an off-air situation occurs and the Show Off Air Slide option is selected. The screen
graphic should be full-screen, in the required video standard for the channel, and be in
OXT format.
5 In the Off Air Recovery list, select one of the following actions to occur 30 seconds after
the Off Air Action if the off-air situation is not resolved:
• Stay Off Air: continues the action selected in the Off Air Action list.
• Perform Take Next: places the next scheduled event on-air.
• Play Evergreen Content: places the Evergreen schedule on-air. For more
information about Evergreen, see About Evergreen content on page 8.
• Play Evergreen Content Unless Playlist is Empty: places the Evergreen schedule
on-air unless the playlist is empty. If the playlist is empty, it defaults to playing the
action selected in the Off Air Action list instead.
6 Click Save when done.