Grass Valley SSP-3801 User Guide v.1.3 - Manual (Page 51)

47
SSP-3801
User Guide
9 Click the Board/FPGA tab to display the revision number for the board and the build
numbers for the field-programmable gate arrays (FPGA) on the SSP-3801 card.
Monitoring the Input Status
The Input Status page allows you to monitor the quality of video and audio input feeds for
the SSP-3801 card. The video and audio inputs are compared with a reference input to
ensure that they match. If they do not match, this may trigger alarms (see
Managing card
alarms on page 49).
To monitor the Input Status:
1 Select Status Information > Input Status. The Input Status page opens.
Fig. 4-2: Input Status page
2 Click the Reference tab to display the status of the timing between the reference signal
and the SDI input signals.
3 Select the Video Inputs tab to display the status of the video input feeds, the Fill and
Key inputs, and if the overall timing alarms have been triggered.
4 Select the Embedded Audio tab to display the status of the embedded audio for the A,
B, and Fill inputs.
5 Select the AES Audio tab to display the type and status of the AES audio for channels 1
and 2.
Monitoring the Output Status
The Video Outputs tab displays the current video standard being output from the SSP-
3801 card. This video standard is defined in Card Configuration > Input/Output menu, in
the Video Standard field.
To monitor the Output Status:
1 Select Status Information > Output Status.
Fig. 4-3: Output Status page
2 The Video Output tab displays the current video output standard.