Grass Valley SSP-3801 User Guide v.1.3 - Manual (Page 72)

68
Analysis and Maintenance
Synchronizing with the GV STRATUS Playout service
Synchronizing with the GV STRATUS Playout service
The Playlist Sync buttons reflect the current state of the playlist synchronization between
the SSP-3801 card and the GV STRATUS Playout service when the card is registered as a
device with the service. When the button is green, it indicates the active state. For example,
if the Enable button is green, the playlist in the card is running in sync with the one
managed by the GV STRATUS Playout service. The status is also displayed in the Status
header on the card’s web interface.
To enable or disable synchronization:
1 From the menu, click Device Control.
2 In the GV STRATUS Playout section, click:
• Enable: to synchronize the card’s playlist with the one in GV STRATUS Playout.
• Disable: to stop synchronizing the playlist with GV STRATUS Playout.
• Force Reconnection: to quickly interrupt the sync between the card’s playlist with
the one in GV STRATUS Playout so the card can resynchronize its playlist with GV
STRATUS Playout.
Note: Playout may be disrupted when you resynchronize with GV
STRATUS Playout using any of these features.