Grass Valley Network Attached Storage System Serial ATA Network User Guide v.1.0.06 - Manual (Page 96)

Adding Groups
Digital News Production 95
Adding Groups
A group combines users into a unit with common rules and permissions. To
create a group, choose
User/Group | Add Group . The Add Group window
appears:
1. Enter a group name using a maximum of 16 characters.
2. Enter a group ID or let the appliance assign a group ID. A Group ID is
required. Valid IDs are (500 through 65533). If the entered or assigned
number is already assigned to a local, NIS, or PDC group, the add command
fails. Use the User/Group List window to locate free IDs.
3. (Optional) To add a user to a group, from the list of available users on the
left, click on the user name, and click Add . This will be a secondary group
for the user. The list on the right shows the users currently in the group.
Repeat this step for each user to add to the group.
4. (Optional) To remove a user, click on the user name in the list on the right.
Click Remove . Repeat this step for each user you do not want in the group.
5. Click Save .