Grass Valley Network Attached Storage System Serial ATA Network User Guide v.1.0.06 - Manual (Page 91)

Chapter 8 Users and Groups
90 Digital News Production
Adding Users
To add a user, choose User/Group | Add User . The Add User window appears:
(Add groups before users. The procedure for adding groups is described in
“Adding Groups” on page 95.) Identify users to the appliance so that files and
information can be accessed by these users.
1. Enter the user login name. This is required.
2. Enter a user ID or let the appliance assign a user ID. This field is required.
Valid IDs are (500 through 65533). If number is already assigned to a user,
an NIS user, or a PDC user, the add fails. Use the “Viewing User/Group List”
on page 97 to locate free IDs.
3. Enter the full name of the user. The first character cannot be a digit. Periods
are not accepted. Spaces are allowed anywhere except the beginning or end
of the field.
4. Enter a password for the user. Use a maximum of eight characters.
5. Re-enter the user password. The two password entries must match.
6. Click Next . The Add User to Group window appears.