Grass Valley Network Attached Storage System Serial ATA Network User Guide v.1.0.06 - Manual (Page 48)

Viewing Logical Unit Status
Digital News Production 47
• Flush Write Cache can be Enabled or disabled
• Controller ID
• Unit ID
• Host Device Name
• RAID system is the controller serial number
• FS Mount Point is a link to the File System Information page, described in
“Viewing File System Information” on page 39.
Rebuild
To rebuild a logical unit, choose Storage | RAID System | Logical Unit |
Rebuild .
Rebuilding applies to one disk drive within the logical unit. If a drive in the
logical unit fails, a spare drive is used as a replacement for the failed drive. All
the data that was formerly on the failed drive is reconstructed on the
replacement drive.