Grass Valley Aurora Playout v.7.0 - Manual (Page 85)

Description Options Setting
Select the color to display on the RDU to indicate
a GPI On-Air trigger. Red;
Green;
Amber On-Air
Color
Select the color to display on an external tally device
to indicate an input trigger. Red;
Green;
Amber External
Color
Select the color to display on the RDU to indicate
that both the GPI On-Air and Tally Input are
triggered. Red;
Green;
Amber On-Air and
External
Color
Enter the Display ID number for each channel on
the RDU. The Display ID determines the position
of the clip information on the RDU. Display ID (1-6) /
Resource ID Resource
The Tally Input determines the state of the channel,
and the color display associated with the current Tally Input (1-2) / Input
ID
channel state on the RDU. Typically, these settings
should be left at their default values. For more
information about tally states, please see the user
manual for your RDU.
Check the Size checkbox to display the clip name
with the full number of characters allowed. If Full Display Size
is checked, 19 characters can be displayed. If Full
is not checked, 13 characters can be displayed.
(TSI-1000 only)
Check the Duration box to display the minute and
seconds. (TSI-1000 only) Duration
Setting Cue and Chain options
14 April 2010 Aurora Playout User Guide 85
Configuring Aurora Playout