Grass Valley Aurora Playout v.7.0 - Manual (Page 77)

• Check the Enable General Purpose Output box to start configuring your GPI Output.
To assign the function of a GPI output, select the channel it affects, the command
in Aurora Playout that triggers GPI output and the GPI output number.
Description Options Setting
Check Enable General Purpose Output to
allow Aurora Playout to trigger GPI outputs. On (checked); Off
(unchecked) Enable GPI
Output
Select the channel that will trigger the GPI
output. ; Channel
1 - 6 Channel
The output is set when the channel is cued;
reset when the channel is playing or if the clip
is ejected. Cued Command
The output is set when the channel is playing;
reset when the channel is stopped or the clip
is ejected. Playing
The output is set when the channel is in loop
play mode; reset if not in loop play mode. Loop Play
The output is set when the Jog Forward or
Jog Backward buttons are pressed; reset when Jog Forward
Jog Backward
the Play, Stop, or Eject buttons are pressed,
or when the channel is re-cued.
The output is set when the playing channel
reaches End Blip 1; reset when the channel
is stopped or the clip is ejected. End Blip 1 (Hold
till End of Clip)
The output is set when the playing channel
reaches End Blip 2; reset when the channel
is stopped or the clip is ejected. End Blip 2 (Hold
till End of Clip)
Select the GPI output you want to activate. ; 1-16 or
1-32 (depending GP Output
on your
configuration)
After configuring your GPI inputs and outputs, you can see the overview of your
current GPI setting by clicking the button.
Defining Function Keys
14 April 2010 Aurora Playout User Guide 77
Configuring Aurora Playout