Grass Valley Aurora Playout v.7.0 - Manual (Page 27)

Aurora Playout installation checklists
Use the following sequence of checklists to guide the overall task flow of installing
and commissioning an Aurora Playout system using SiteConfig.
Pre-installation planning checklist
Comment Task
Aurora Playout installation files can be
supplied via software CD, GrassValley Procure the Aurora Playout Software
website, FTP site or other distribution
mechanisms
The minimum and recommended system
specification requirements are listed in
Aurora Playout Release Notes Check hardware specification
requirements for Aurora Playout devices
— Install SiteConfig on a control point PC
within your network operation
Mircosoft .NET version 2.0 is provided
within ConnectivityKit folder at your Check whether Microsoft .NET version
2.0 is already installed on Aurora Playout
devices
SiteConfig install location if you need to
install the application
ProductFrame Discovery Agent is
provided within DiscoveryAgent Setup Check whether ProductFrame Discovery
Agent service is already installed on
Aurora Playout devices
folder at your SiteConfig install location
if you need to install the service
Make the (*.cab) file accessible to the
SiteConfig control point PC Get Aurora Playout software installation
(*.cab) file
Next: Hardware installation checklist
Hardware installation checklist
Use items in this checklist as appropriate for the optional equipment you are installing
for your Aurora Playout.
Comment Task
GPI inputs and outputs can be connected
through PCI board or ethernet Connect GPI inputs and outputs
depending on your device type
Connect the RDU 1510 Under Monitor
Display
Install X-keys Jog/Shuttle Controller
Next: Network setup and installation checklist
14 April 2010 Aurora Playout User Guide 27
Preparing for installation