Grass Valley 8943RDA - Manual (Page 68)

Use
this
link
68 8943RDA/-D/-DFR — Instruction Manual
Configuration
8943RDA-DFR I/O Config Web Page
Use the I/O Config web page to see illustrations of the 89003FR-R rear
module as used with the 8943RDA-DFR in the following figures:
• 89003FR-R without optional fiber submodule ( Figure 33 on page 69 )
• 89003FR-R with optional Dual Transmitter fiber submodule ( Figure 34
on page 70 )
• 89003FR-R with optional Dual Receiver fiber submodule ( Figure 35 on
page 71 )
• 89003FR-R with optional Transceiver fiber submodule ( Figure 36 on
page 72 )
Rear Module Configuration
All of the input and output connectors on the corresponding 89003FR-R
rear module are illustrated on the I/O Config web page.
The inputs can be configured with the following controls:
Reporting Enabled – the status reporting of the input can be enabled or dis-
abled at the module level by selecting or deselecting the corresponding
checkbox in the
Reporting column for each input.
When the reporting is enabled, the input status can be also be monitored by
color following the input status on the Status web page.
If monitoring is disabled, the area will appear in gray indicating it is not
monitored.
Note Status of the video outputs is not monitored in this application.