Grass Valley 8943RDA - Manual (Page 61)

8943RDA/-D/-DFR — Instruction Manual 61
Configuration
8943RDA-DFR Module Configuration and Operation
The 8943RDA-DFR module uses the 89003FR-R rear module and has two
coax inputs at BNC J9 and BNC J8 and four pairs of coax outputs. This
module may also be fitted with one optional fiber optic submodules that
can provide two fiber outputs (Dual Transmitter), two fiber inputs (Dual
Receiver), or one fiber input and one fiber output (Transceiver). For option
models available, refer to
Fiber Optics Submodule Installation (8943RDA-DFR
only) on page 14 . For cabling instructions, see 8943RDA-DFR Module
Cabling on page 24 .
The status and configuration LEDs present on the 8943RDA-D module are
shown in
Figure 28 . These LEDs operate as described in the LED summary
in Table 5 on page 26 .
Figure 28. 8943RDA-DFR Front Module Indicator LEDs