Config – Grass Valley 8943RDA User Manual
Page 46
Use
this
link
46
8943RDA/-D/-DFR — Instruction Manual
Configuration
8943RDA I/O Config Web Page
Use the I/O Config web page to see an illustration of the 89003E-R rear
module as used with the 8943RDA, enable or disable module level status
reporting, and naming inputs. Refer to
for an illustra-
tion of the 8943RDA Status web page.
Rear Module Configuration
All of the input and output connectors on the corresponding 89003E-R rear
module are illustrated on the I/O Config web page.
The inputs can be configured with the following controls:
Reporting Enabled
– the status reporting of the video input at Coax J9 can be
enabled or disabled at the module level by selecting or de-selecting the cor-
responding checkbox in the
Reporting Enabled
column.
When the reporting is enabled, the input status can be also be monitored by
color following the input status on the Status web page.
If monitoring is disabled, the area will appear in gray indicating it is not
monitored.
Note
Status of the video outputs is not monitored in this application.
The enabling or disabling of this reporting will not affect upper level
reporting to the 8900NET (Net Card) or an SNMP monitoring system if
used.
Naming Input
– a name can be assigned to the input signal for Ch 1 at Coax J9.
The name can be up to 15 characters.