8943rda-d module cabling – Grass Valley 8943RDA User Manual

Page 23

8943RDA/-D/-DFR — Instruction Manual

Cabling

8943RDA-D Module Cabling

The 8943RDA-D front module requires the 89003E-R rear module. Two
electrical inputs are available and each may be assigned to any of the four
output pairs in configuration. An output pair may only have one input
assigned.

For example, BNC J9 can be assigned (mapped) to output pairs J1/J2 and
J3/J4 and BNC J8 can be assigned to output pairs J5/J6 and J7/J8. Video
input to video output pair(s) mapping is done in configuration using the
local onboard controls, Settings web page, or Newton control panel
(

and

for 89003E-R cabling information.

Figure 12. 8943RDA-D Cabling on 89003E-R Module

Table 3. Cabling Inputs and Outputs for 8943RDA-D Module

Signal Inputs

Outputs Available

J9 BNC and J10 BNC

BNC pairs: J1/J2, J3/J4, J5/J6, J7/J8