Features – Grass Valley 8943RDA User Manual
Page 10
10
8943RDA/-D/-DFR — Instruction Manual
Features
Features
The features of the 8943RDA modules include:
•
Multi-format SD-SDI, HD-SDI, 3G-SDI on electrical inputs and outputs,
•
Non-inverted outputs allow distribution of signals such as DVB ASI,
•
Reclocked SD, HD, or 3G electrical outputs which reduce jitter on the
incoming signal,
•
Auto cable auto equalization for up to 400 meters of cable in the case of
SD-SDI and DVB ASI and up to 140 meters of cable in the case of
HD-SDI (1.485 Gb/s), 90 meters (Input 1) and 100 meters (Input 2) for
3G-SDI (3 Gb/s) signals,
•
Accepts a wide range of standard definition or high definition input
signals,
•
8943RDA-D and 8943RDA-DFR inputs can be mapped to output pairs
in any combination,
•
Provides a bypass mode for signal rates not supported by the reclocker,
•
Provide alarm (signal presence detection) and status management,
•
Supports SNMP MIB reporting basic board alarms, and
•
Remote control and monitoring support: web pages, Newton control
panel, and NetConfig management system.
In addition to the features above, the 8943RDA-DFR fiber ready model with
the 89003FR-R rear module can be populated with any one SFP (Small
Form-factor Pluggable) dual transmitter (two outputs), transceiver (one
input/one output), or dual receiver (two inputs) submodules for fiber optic
interface as listed in
.