Grass Valley 8943RDA - Manual (Page 27)

8943RDA/-D/-DFR — Instruction Manual 27
Power Up
Collective Module Status Reporting
Some status and fault reporting to the module level has only one status
indicator, such as the Status LED on each web page. This status indicator
must reflect the collective status of all four channels.
Table 6 describes what
the collective input status will be for each channel state given below.
MODULE LOCAL CONFIGURATION LEDS
CH 1-4 OUTPUT SOURCE
(Yellow)
On or Off Refer to Local Onboard Configuration on page 33
CH 1-4 INPUT OP MODE
(Yellow)
On or Off Refer to Local Onboard Configuration on page 33
Table 6. Collective Input Status
CH 1
Input Status
CH 2
Input Status
CH 3
Input Status
CH 4
Input Status
Collective Input Status
Not Monitored Not Monitored Not Monitored Not Monitored Not Monitored
Not Present N/A N/A N/A Not Present
N/A Not Present N/A N/A Not Present
N/A N/A Not Present N/A Not Present
N/A N/A N/A Not Present Not Present
Present Not Monitored Not Monitored Not Monitored Present
Not Monitored Present Not Monitored Not Monitored Present
Not Monitored Not Monitored Present Not Monitored Present
Not Monitored Not Monitored Not Monitored Present Present
Present Present Not Monitored Not Monitored Present
Present Not Monitored Present Not Monitored Present
Present Not Monitored Not Monitored Present Present
Not Monitored Present Present Not Monitored Present
Not Monitored Present Not Monitored Present Present
Not Monitored Not Monitored Present Present Present
Present Present Present Not Monitored Present
Present Present Not Monitored Present Present
Present Not Monitored Present Present Present
Not Monitored Present Present Present Present
Present Present Present Present Present
Table 5. Front Edge LED Indicators
LED Indication Condition
STATUS LEDS