Grass Valley 8943RDA - Manual (Page 56)

Use
this
link
56 8943RDA/-D/-DFR — Instruction Manual
Configuration
8943RDA-D I/O Config Web Page
Use the I/O Config web page to see an illustration of the 89003E-R rear
module as used with the 8943RDA-D (
Figure 26 on page 57 ).
Rear Module Configuration
All of the input and output connectors on the corresponding 89003E-R rear
module are illustrated on the I/O Config web page.
The inputs can be configured with the following controls:
Reporting Enabled – the status reporting of the input can be enabled or dis-
abled at the module level by selecting or deselecting the corresponding
checkbox in the
Reporting column for each input.
When the reporting is enabled as shown below, the input status can be also
be monitored by color following the input status on the Status web page.
If monitoring is disabled, the area will appear in gray indicating it is not
monitored.
Note Status of the video outputs is not monitored in this application.