Grass Valley 8943RDA - Manual (Page 14)

14 8943RDA/-D/-DFR — Instruction Manual
Installation
Fiber Optics Submodule Installation (8943RDA-DFR only)
The 8943RDA-DFR front modules can be populated with any one of the
SFP dual transmitter, transceiver, or dual receiver submodules listed in
Table 1 .
The optional strap mount SFP Fiber Optic kit for GeckoFlex fiber-ready
modules (handling video from 143 Mb/s to 3 Gb/s) includes:
• One Strap Mount SFP Fiber Optic Submodule (labeled for type)
• Mounting bracket for submodule installation
• Jumper cable assembly for connecting submodule to front module rear
connector
Installation of the submodule involves three steps:
1. Mount the metal bracket to the submodule,
2. Mount the submodule and bracket on the front of the 8943RDA-DFR
front module before it is installed in the frame, and
3. Install the jumper cable assembly to the submodule and the front
module rear connectors.
CAUTION The Fiber Optic submodule is static sensitive. Use static handling precautions
when installing or removing the submodule.
Table 1. SFP Fiber Optic Submodule Option Models
SFP Model Number Transmitter Frequencies Supported
SFP-13103G-M1DTX-K 1310 nm
Receiver Frequencies Supported
SFP-13103G-M1DRX-K 1270 nm >1610 nm
Transceiver Frequencies Supported
SFP-13103G-M1TRX-K 1310 nm (input) and 1310 nm (output)