H3C Technologies H3C Intelligent Management Center - Manual (Page 97)

88
c. NQA Instance Description—Enter monitor the link between the VPN gateway and the core
router.
d. NQA Level Name—Select Gold Service Level.
e. NQA Type Name—Select Link for VPN Logon.
6. Click Next.
The page for configuring deployment information appears.
Figure 26 Configuring deployment information
7. Configure the following parameters:
a. Source Device—Select the VPN gateway.
b. Destination Device—Select the core router.
c. Source IP Address—Select the source IP address for NQA operations.
d. Destination IP Address—Select the destination IP address for NQA operations.
Use the default settings for other parameters.
8. Click Test to check whether the NQA instance is correctly configured.
If the test fails, modify the parameters that you have configured in
Figure 26 .
9. Click Next.
The page for configuring monitor information appears. Use the default settings on the page.