H3C Technologies H3C Intelligent Management Center - Manual (Page 121)

112
{
Select Jitter, one way average delay, Average RTT, Packet Loss Rate, Error Rate, and
Unreachable Rate from the NQA Link Quality KQI class.
{
Select Interface Performance, Max Bandwidth Usage, and Valid Through Usage from the
Interface Performance KQI class.
{
Select In Traffic and Out Traffic from the Interface Traffic KQI class.
Figure 46 Adding SLA monitored objects
7. Associate the KQIs with the monitored objects:
a. Double-click the icon of a KQI, for example, jitter.
The page for configuring the jitter appears.
b. In the Configure KQI Resources area, select key links described in Table 19 from the Resource
Name column.
Use the default settings for other parameters on the page.
To modify the formula in the Configure KQI Formula area, follow the instructions in
"Configuring a KQI."
c. Click OK.
The KQI and the monitored objects are associated.
d. Associate other KQIs with the monitored objects in the same way the jitter is associated with
the monitored objects.
8. Set service properties: