H3C Technologies H3C Intelligent Management Center - Manual (Page 120)

111
Figure 45 Configuring monitor information
10. Click Finish.
The newly added NQA instance is displayed in the NQA instance list.
For more information about adding NQA groups and creating NQA instances, see " Adding an NQA
group" and "Adding an NQA instance," respectively.
Creating an SLA
This configuration example uses system-defined KQIs and requires no service level setting. For more
information about configuring KQIs and service levels, see "Adding a KQI " and "Adding a service
level."
To create an SLA:
1. Click the Service tab.
2. From the left navigation tree, click Service Health Manager > SLA.
The SLA page appears.
3. Click Add and select Manually Add.
The page for adding an SLA appears.
4. Click Select Device to add Router A, Router B, Switch C, Switch D, the mail server, and the DNS
MX server.
The devices appear in the Resource Topology area. NQA instances between them are also
imported and represented in green dashed lines.
5. Right-click the Resource Topology area, select Add Interfaces, and then select Interfaces S1 and
S2.
6. In the left area of the page, select the following KQIs and drag them to the area above the
Resource Topology area.
{
Select Device Response Time, Device Unreachable, CPU Usage, and Memory Usage from the
Device Status KQI class.