H3C Technologies H3C Intelligent Management Center - Manual (Page 113)

104
Monitored object Object type System-defined KQI KQI data source
• Router B
• Switch C
• Switch D
Device response time
• Mail server
• DNS MX server
Key device
Device unreachable
Device response time
CPU usage
Memory usage
Performance Management
Link between the
following devices:
• Router A and Router B
• Router B and Switch C
• Router B and Switch D
Key link
Jitter
One way average delay
Average RTT
Packet loss rate
Error rate
Unreachable rate
NQA instance module
• Interface S1
• Interface S2
Key interfaces
Interface performance
Valid through usage
Max bandwidth usage
Performance Management
In traffic
Out traffic
NTA
IMPORTANT:
Make sure NTA is deployed in
the same IMC system where
SHM is deployed.
Configuration procedures
Make sure you have the administrator access to perform the following configuration tasks.
Importing the key devices to the IMC Enterprise and Standard platform
Import the following devices to the IMC Enterprise and Standard platform:
• Router A.
• Router B.
• Switch C.
• Switch D.
• Mail server.
• DNS MX server.
For more information, see HP IMC Enterprise and Standard Platform Administrator Guide.
Adding monitoring attributes on the key devices
The KQIs interface performance, valid through usage, and max bandwidth usage have multiple KPIs.
For more information, see Table 9 . When you add monitoring attributes on routers, make sure the
monitoring attributes that are associated with KPIs are added on the key devices.