H3C Technologies H3C Intelligent Management Center - Manual (Page 89)

80
Adding a collection item
1. Access the collection item list page.
2. Click Add.
The Add Collection Item page appears.
3. Configure the following parameters:
{
Item Name—Enter a name for the collection item.
{
Command Content—Enter the commands that the collection item executes.
{
Report Title—Enter the title to be displayed for the collection item in inspection reports.
{
Requirement—Enter the requirement for the collected data.
{
Advice—Enter the advice for users when the collected data does not meet the requirement.
{
Description—Enter a description for the collection item.
{
Severity—Select a severity level for the collected data that does not meet the requirement:
Common or Major.
{
Rule Type—Select a rule type:
− Match Rule—Select this type to specify a regular expression in the Command Rule
Information area.
− Python Script—Select this type to import a python script.
− Display—Select this type to display the original collected data in inspection reports.
{
Group—Select a group for the collection item.
4. Click OK.
Modifying a collection item
Modifying a user-defined collection item
1. Access the collection item list page.
2. Click the Modify icon for a user-defined collection item.
The Modify Collection Item page appears.
3. Modify the parameters for the collection item. (See " Adding a collection item .")
4. Click OK.
Modifying the threshold for a system-defined collection item
1. Access the collection item list page.
2. Click the name of a collection item group.
The collection item group member list page appears.
3. Click Modify Threshold for a collection item.
4. Modify the threshold.
5. Click OK.