Configuring an ftp filtering policy – H3C Technologies H3C SecPath F1000-E User Manual
Page 81

73
Item Description
Enable Logging
Specify whether to log packet matching events.
IMPORTANT:
The logging function takes effect only when it is enabled in both the
content filtering policy and the interzone policy.
Configuring an FTP filtering policy
Select Identification > Content Filtering > Filtering Policy from the navigation tree, and then click the FTP
Policy tab to enter the FTP filtering policy list page, as shown in
. Then, click Add to enter the
page for adding an FTP filtering policy, as shown in
.
Figure 73 FTP filtering policy list
Figure 74 Adding an FTP filtering policy
This manual is related to the following products:
- H3C SecPath F5000-A5 Firewall H3C SecPath F1000-A-EI H3C SecPath F1000-E-SI H3C SecPath F1000-S-AI H3C SecPath F5000-S Firewall H3C SecPath F5000-C Firewall H3C SecPath F100-C-SI H3C SecPath F1000-C-SI H3C SecPath F100-A-SI H3C SecBlade FW Cards H3C SecBlade FW Enhanced Cards H3C SecPath U200-A U200-M U200-S H3C SecPath U200-CA U200-CM U200-CS