Figure 40, N in, Figure 41 – H3C Technologies H3C SecPath F1000-E User Manual
Page 43
35
Figure 40 Protected IP address entries
Figure 41 Protected IP address entry configuration page
Table 13 Configuration items
Item
Description
Protected IP Address
Enter the IP address to be protected by the TCP proxy. It is the destination IP address
of the TCP connection.
Port Number
Enter the destination port of the TCP connection.
The option any specifies that TCP proxy services TCP connection requests to any port
of the server at the destination IP address.
Displaying information about protected IP address entries
Select Intrusion Detection > TCP Proxy > Protected IP Configuration to enter the page shown in
,
which lists information about protected IP address entries.
Table 14 Field description
Field
Description
Protected IP
IP addresses protected by the TCP proxy feature.
Port Number
Destination port of the TCP connection.
The option any specifies that TCP proxy services TCP connection requests to any port
of the server at the destination IP address.
Type
The protected IP address entries can be static or dynamic.
Lifetime(min)
Lifetime for the IP address entry under protection. This item is displayed as – for static
IP address entries.
When the time reaches 0, the protected IP address entry will be deleted.
Number of Rejected
Amount of requests for TCP connection requests matching the protected IP address
entry but were proved to be illegitimate.
- H3C SecPath F5000-A5 Firewall H3C SecPath F1000-A-EI H3C SecPath F1000-E-SI H3C SecPath F1000-S-AI H3C SecPath F5000-S Firewall H3C SecPath F5000-C Firewall H3C SecPath F100-C-SI H3C SecPath F1000-C-SI H3C SecPath F100-A-SI H3C SecBlade FW Cards H3C SecBlade FW Enhanced Cards H3C SecPath U200-A U200-M U200-S H3C SecPath U200-CA U200-CM U200-CS