H3C Technologies H3C SecPath F1000-E - Manual (Page 9)

1
Product overview
The H3C SecPath F1000-E Firewall and H3C SecPath F1000-S-EI Firewall are new-generation gigabit
firewalls developed for medium- and large-sized enterprise networks.
F1000-E chassis views
Figure 1 F1000-E front view
(1) Power cord bail latch (2) AC power switch (ON/OFF)
(3) RPS receptacle (RPS) (4) CF card slot (CF CARD)
(5) Device-mode USB port 1 (USB 1) (6) Host-mode USB port 0 (USB 0)
(7) Console port (CONSOLE) (8) AUX port (AUX)
(9) AC-input power receptacle (–100 to 240 VAC @ 50 or 60 Hz; 2.5 A)
Figure 2 F1000-E rear view
(1) Grounding screw and sign (2) Combo interfaces (0 to 3)
(3) Interface module slot 2 (4) Interface module slot 1
Each combo interface comprises one 10/100/1000 Mbps copper port and one 1000 Mbps fiber port.
These two ports cannot work simultaneously. You can use the combo enable { copper | fiber }
command in interface view to activate either port. When you activate one port, the other port
automatically shuts down.
The firewall comes with each combo fiber port covered by a dust cap.
1
2 3
4
5 6 7 8
9