H3C Technologies H3C SecPath F1000-E - Manual (Page 75)

67
Item Description
Receiving sensitivity –7.5 dBm –10.3 dBm –11.3 dBm
Central wavelength 850 nm 1310 nm 1550 nm
Maximum
transmission distance
300 m (984.25 ft) 10 km (6.21 miles) 40 km (24.86 miles)
Fiber type
62.5/125 μm multimode
fiber 9/125 μm single-mode
fiber 9/125 μm single-mode
fiber
NOTE:
In LAN PHY mode, the interface module supports 10GBASE-R. In WAN PHY mode, the interface module
supports 10GBASE-W.
NSQ1GT2UA0
Table 31 NSQ1GT2UA0 specifications
Item Description
Connector type RJ-45
Number of interfaces 2
Interface type
Autosensing (the Ethernet interface does not support MDI/MDIX autosensing
when operating in forced mode)
Frame format
Ethernet_II
Ethernet_SNAP
Cable type Category-5 twisted pair or higher
Transmission distance 100 m (328.08 ft)
Hot swapping Supported
Rate and negotiation mode
10 Mbps (autosensing) Half-/full-duplex
100 Mbps (autosensing) Half-/full-duplex
1000 Mbps (autosensing) Full-duplex
NSQ1GP4U0
Table 32 NSQ1GP4U0 specifications
Item Description
Connector type LC
Transceiver module type SFP
Number of interfaces 4
Compliant standard 802.3, 802.3u, and 802.3ab