Sfp+ port led, Qsfp+ port led, Management ethernet port leds – H3C Technologies H3C S5560 Series Switches User Manual
Page 89: Interface card operating mode
80
SFP+ port LED
Table 29 SFP+ port LED description
SFP+ port LED status
Description
Steady green
The port is operating at 10 Gbps. The port LED fast flashes when the port is sending
or receiving data.
Steady yellow
The port is operating at 1 Gbps. The port LED fast flashes when the port is sending
or receiving data.
Flashing yellow (3 Hz)
POST has failed on the port.
Off
•
No link is present on the port.
•
The port mode LED operates in IRF mode.
•
The port mode LED operates in PoE mode (for PoE switches only.)
QSFP+ port LED
The S5560-30S-EI, S5560-54S-EI, and S5560-54QS-EI switches provide two QSFP+ ports. Each QSFP+
port has a QSFP+ port LED to indicate its operating state.
Table 30 QSFP+ port LED description
LED status
Description
Steady green
A transceiver module or cable has been correctly installed. The port has a link and
is operating at 40 Gbps.
Flashing green
The port is sending or receiving data at 40 Gbps.
Steady yellow
A transceiver module or cable has been correctly installed. The port has a link and
is operating at 10 Gbps.
Flashing yellow
The port is sending or receiving data at 10 Gbps.
Off
No transceiver module or cable has been installed or no link is present on the port.
Management Ethernet port LEDs
S5560-30C-EI&S5560-54C-EI&S5560-30F-EI&S5560-30C-PWR-EI&S5560-54C-PWR-EI
The S5560-30C-EI, S5560-54C-EI, S5560-30F-EI, S5560-30C-PWR-EI, and S5560-54C-PWR-EI
switches provide an ACT/LINK LED to indicate the operating state of the management Ethernet port.
Table 31 Management Ethernet port LED description for the S5560-30C-EI, S5560-54C-EI,
S5560-30F-EI, S5560-30C-PWR-EI, and S5560-54C-PWR-EI switches
Management Ethernet port
LED (ACT/LINK) status
Description
Steady green
The port is operating at 1000 Mbps. The port LED fast flashes when the port
is sending or receiving data.