H3C Technologies H3C S5560 Series Switches - Manual (Page 81)

72
Module description
Central
wavelength
(nm)
Connecto
r
Fiber diameter
(μm)
Max transmission
distance
SFP-FE-LX-SM
1550-BIDI
LC BX 10-D
Transceiver
TX: 1550
RX: 1310
NOTE:
•
To guarantee the functionality of the SFP ports, use only H3C SFP transceiver modules.
• The SFP transceiver modules available for the switch are subject to change over time. For the most
up-to-date list of SFP transceiver modules, consult your H3C sales representative or technical support
engineer.
• For the SFP transceiver module specifications, see H3C Transceiver Modules User Guide.
NOTE:
To install multiple SFP-GE-LH100-SM1550 transceiver modules on the S5560-30F-EI switch, separate
these transceiver modules with other transceiver modules. For example, you can install the
SFP-GE-LH100-SM1550 transceiver modules in ports 1 and 2, other transceiver modules in ports 3 and 4,
and the SFP-GE-LH100-SM1550 transceiver modules in ports 5 and 6.
SFP+ port
The switch provides four fixed SFP+ ports on the front panel. To connect the peer SFP+ ports over a long
distance, use SFP/SFP+ transceiver modules and fibers. To connect the peer SFP+ ports over a short
distance, use SFP+ cables. You can install the 1000 Mbps SFP transceiver module in Table 17 and 10
Gbps SFP+ transceiver modules in Table 18 in the SFP+ ports.
Table 17 1000 Mbps SFP transceiver modules available for the SFP+ ports
Module
description
Central
wavelen
gth (nm)
Connector
Cable/fiber
diameter
(μm)
Multimode
fiber modal
bandwidth
(MHz × km)
Max transmission
distance
SFP-GE-T
N
/
A
RJ-45
Category-5
twisted pair
N/A 100 m (328.08 ft)
SFP-GE-SX-MM850-
A
850 LC
Multi-mode,
50/125
500 550 m (1804.46 ft)
400 500 m (1640.42 ft)
Multi-mode,
62.5/125
200 275 m (902.23 ft)
160 220 m (721.78 ft)
SFP-GE-LX-SM1310-
A
1
3
1
0
LC
Single-mode,
9/125
N/A 10 km (6.21 miles)
Multi-mode,
50/125
500 or 400 550 m (1804.46 ft)
Multi-mode,
62.5/125
500 550 m (1804.46 ft)