H3C Technologies H3C S5560 Series Switches - Manual (Page 83)

74
Module
description
Central
wavelength
(nm)
Connector
Fiber
diameter
(μm)
Multimode
fiber modal
bandwidth
(MHz × km)
Max transmission
distance
SFP-XG-LH40-SM
1550
1550 LC
Single-mode,
9/125
N/A 40 km (24.86 miles)
SFP-XG-LH80-SM
1550
1550 LC
Single-mode,
9/125
N/A 80 km (49.71 miles)
SFP-XG-LH80-SM
1550-D
1550 LC
Single-mode,
9/125
N/A 80 km (49.71 miles)
Table 19 SFP+ DAC cables available for the SFP+ ports
Cable description Cable length
LSWM1STK 0.65 m (2.13 ft)
LSWM2STK 1.2 m (3.94 ft)
LSWM3STK 3 m (9.84 ft)
LSTM1STK 5 m (16.40 ft)
Figure 74 SFP+ DAC cable
(1) Connector (2) Pull latch
NOTE:
•
The fixed SFP+ ports on the switch do not support the SFP-XG-LH40-SM1550, SFP-XG-LH80-SM1550,
SFP-XG-LH80-SM1550-D, and SFP-XG-LX220-MM1310 transceiver modules.
• The LSWM2SP8P interface card does not support the SFP-XG-LX220-MM1310 transceiver module.
• To guarantee the functionality of the SFP+ ports, use only H3C SFP/SFP+ transceiver modules and SFP+
DAC cables.
• The SFP/SFP+ transceiver modules and SFP+ DAC cables available for the switch are subject to change
over time. For the most up-to-date list of SFP/SFP+ transceiver modules and SFP+ DAC cables, consult
your H3C sales representative or technical support engineer.
• For the specifications for the H3C SFP/SFP+ transceiver modules and SFP+ DAC cables, see H3C
Transceiver Modules User Guide.