H3C Technologies H3C S5560 Series Switches - Manual (Page 41)

32
Figure 41 Connecting the PSR150-D1
Connecting the PSR360-56A/PSR720-56A/PSR1110-56A
The following takes the PSR720-56A as an example. The connection procedure for the PSR360-56A and
PSR1110-56A is similar.
To connect the PSR720-56A:
1. Wear an ESD wrist strap and make sure it makes good skin contact and is correctly grounded.
2. Plug the female connector end of the AC power cord into the AC input socket of the power module
(see callout 1 in
Figure 42 ).
3. Use a cable tie to secure the power cord to the handle of the power module (see callout 2 and
callout 3 in
Figure 42 ).
4. Connect the other end of the AC power cord to an AC power outlet.
Figure 42 Connecting the PSR720-56A
1
2
1
2
3