H3C Technologies H3C S5560 Series Switches - Manual (Page 37)

28
Power module Connection procedure reference
Hot swappable power module
PSR150-A1 Connecting the PSR150-A1
PSR150-D1
(External RPS power module:
RPS800-A or RPS1600-A)
Connecting the PSR150-D1
PSR360-56A
PSR720-56A
PSR1110-56A
Connecting the PSR360-56A/PSR720-56A/PSR1110-56A
Connecting an AC power cord to the switch
To connect an AC power cord to a switch that uses fixed power modules:
1. Wear an ESD wrist strap and make sure it makes good skin contact and is correctly grounded.
2. Attach the hooks of the bail latch into the holes on the two sides of the AC-input power receptacle,
and pull the bail latch upwards (see
Figure 36 ).
3. Connect one end of the AC power cord to the AC-input power receptacle on the switch (see callout
1 in
Figure 37 ).
4. Pull the bail latch down to secure the plug to the power receptacle (see callout 2 in Figure 37 ).
5. Connect the other end of the power cord to the AC power outlet.
Figure 36 Connecting an AC power cord to the switch (1)