beautypg.com

Using menu – Epson 10020 User Manual

Page 95

background image

You

can also request help information for more than one

command. Follow these steps:

1. At the command prompt, type

HELP

followed by the

names of the commands you want information about. Then

press Enter. Separate each command name with a space.

For example, to see help information for the DISKCOPY,

FORMAT, and COPY commands, type the following and

press Enter:

HELP DISKCOPY FORMAT COPY

2. The help information for the first command is displayed

first. If there is more than one page of information about

the command, you see the prompt PgUp at the top of the

screen. Press PgUp to see more.

3.

Press

ESC

to see the help information for the next

command.

4. To exit the HELP program, press

E

SC

after viewing the

information for the last command.

Using MENU

The MENU program lets you display a menu of MS-DOS

commands and select the one you need. MENU is easy to use
because you can execute commands without having to

remember the exact syntax for each command.

Follow these steps to access the MENU program:

1.

Log onto drive C (if you have a hard disk) or insert the
Operating 2 diskette into drive A and log onto that drive.

3-36

Using MS-DOS With Your Computer