beautypg.com

Removing an access slot cover, Installing option cards – Epson 10020 User Manual

Page 111

background image

Removing an Access Slot Cover

Some option cards, such as the video card, have an outlet for
connecting an external device. If you install an option card
that has an external connector for other equipment (such as a
monitor), you need to remove the plastic

access slot cover on

the computer’s back panel that corresponds to the option card

slot. Follow these steps:

1.

Lay the back panel down as shown below. Each individual
access slot cover is held in position by a tab at the bottom

and a clip at the top.

2. Remove the appropriate cover by pushing down on the

clip, as shown above. Save the cover in case you need to

remove the option card later.

Installing Option Cards

4-7