beautypg.com

Removing the diskette drive protector card – Epson 10020 User Manual

Page 19

background image

Besides this manual, you should have the following:

The computer and power cord

The keyboard with attached cable

Four diskettes: three that contain the MS-DOS operating
system (Startup, Operating 1, and Operating 2), and a

Reference diskette

An MS-DOS Reference Manual.

In addition to these items, you need a compatible video
monitor to use with the computer. With the MGA (multi-

graphics adapter) card in the computer, you can use a

monochrome or color graphics monitor.

Note
If you chose a monitor that is not compatible with the MGA
card, you'll also need the appropriate display adapter card to

use with that monitor.

You’ll find a warranty card and a registration card with the

computer. Fill out the registration card and mail it to Epson.
With this card on file, Epson can send you update information.

Be sure to keep your packing materials. They provide the best
protection for your computer if you need to transport it later.

Removing the Diskette Drive Protector Card

A protective piece of cardboard occupies the slot of each

diskette drive in your computer. This card is inserted at the
factory to protect the read/write heads in the drive.

Be sure to remove the card from each diskette drive before you
turn on the computer. Turn the diskette drive latch up until it
is horizontal and carefully pull out the card.

1-2

Setting Up Your System