Epson 10020 User Manual
Page 142
Use the arrow keys to highlight the desired communication
speed and then press Enter.
Parity
To set the type of parity check, highlight
Parity
and press
Enter. You see the following choices:
None
Odd
Even
Highlight the desired type of parity check and press Enter.
Data length
To change the data length value, highlight
Data length
and press Enter. The number changes from 8 to 7, or from 7 to
8. Press Enter again
if
you want to change back to the
other
number.
Stop bits
To change the number of stop bits, highlight Stop
bits
and press Enter. The number changes from 1 to 2, or from 2 to
1. Press Enter again if you want to change back to the other
number.
A-12
Changing DIP Switches and Using Setup