Epson 10020 - Manual (Page 20)

Save
the protector
card
and reinsert it whenever you
move
the
computer. If you don’t plan to use your computer for a week or
more, reinsert
the card to help prevent dust from entering the
disk drive.
2
Choosing a Location
Before you set up your computer, it is important to choose the
right location. Select a spot that provides the following:
A large, sturdy desk or table that can easily support the
weight of your system, including all its components. Make
sure the surface is hard and flat. Soft surfaces like beds and
carpeted floors
attract static
electricity, which
can erase
data on your disks and damage the computer’s circuitry.
Soft surfaces also prevent proper ventilation.
Good air circulation.
Air must be able to move freely under
the system as well as behind it. Leave several inches of
space around the computer to allow ventilation.
Setting Up Your System 1-3